Where Do I Find The Fuse On A Sony KV 2782R Set?
The picture on my Sony KV 2782R disappeared in the middle of the program. I hear the set turn "on" when I press the power button, but the red indicator light does not come on. Where can I find the fuse? And if it's not the fuse, what could it be?
Answer:
Tracemains cable into tv +u will find mains fuse ussually 3.15 amp antisurge ,if manual+voltage checks needed
Resolved Questions:
How do you put together DVD player into multi region?
This is a task which needs a little time and energy. You can make your DVD multi region with the help of some instructions and codes. I believe that an expert on electronic and these things would be the best individual to advice you on...
My Maytag Washing Machine Will Not Drain On The Rinse Cycle Any Info....
I bought a used machine, fairly new. It didn't drain any. After removing back panal, just before wet was to enter the drain hose, i found a wash rag lodged. Apparently this solves the mystery of the missing socks. I reason...
How Do You Tell If A Machine Is A Low Shank Or A High Shank? I Have...
If you place the presser foot in the down position and measure from the bottom of the foot to the screw hole where it attaches you will find either a 1-1/4 inch measure or a 3/4 inch...
Answer:
Tracemains cable into tv +u will find mains fuse ussually 3.15 amp antisurge ,if manual+voltage checks needed
Resolved Questions:
How do you put together DVD player into multi region?
This is a task which needs a little time and energy. You can make your DVD multi region with the help of some instructions and codes. I believe that an expert on electronic and these things would be the best individual to advice you on...
My Maytag Washing Machine Will Not Drain On The Rinse Cycle Any Info....
I bought a used machine, fairly new. It didn't drain any. After removing back panal, just before wet was to enter the drain hose, i found a wash rag lodged. Apparently this solves the mystery of the missing socks. I reason...
How Do You Tell If A Machine Is A Low Shank Or A High Shank? I Have...
If you place the presser foot in the down position and measure from the bottom of the foot to the screw hole where it attaches you will find either a 1-1/4 inch measure or a 3/4 inch...